**T-handle Reamer Tool**: Used to clean and enlarge the puncture hole for better plug insertion

How to Use the 6 Piece Set Tubeless Tyre Repair Kit

Introduction

This guide provides step-by-step instructions for beginners on how to use the 6 Piece Set Tubeless Tyre Repair Kit to fix punctures in tubeless tyres.

Tools Included in the Kit

• T-handle rasp tool
• T-handle insertion tool
• Rubber cement
• Repair strings (plugs)
• Utility knife
• Instructions manual (optional)

Steps to Repair a Tubeless Tyre

1. Identify the Puncture

• Locate the puncture by looking for embedded objects or listening for hissing sounds.
• If needed, spray soapy water on the tyre and look for bubbles to identify the leak.

2. Prepare the Area

• Remove any foreign objects from the puncture using pliers.
• Use the T-handle rasp tool to clean and roughen the puncture hole by inserting and twisting it.

3. Insert the Repair String

• Thread a repair string through the eye of the T-handle insertion tool.
• Apply a small amount of rubber cement to the repair string if provided.
• Push the insertion tool into the puncture hole until about two-thirds of the string is inside.
• Quickly pull out the insertion tool, leaving the string inside the tyre.

4. Trim the Excess

• Use the utility knife to trim the excess repair string, leaving it flush with the tyre surface.

5. Check the Repair

• Reinflate the tyre to the recommended pressure.
• Check for leaks by applying soapy water to the repaired area and looking for bubbles.

Conclusion

With these steps, you can effectively use the tubeless tyre repair kit to fix punctures and get back on the road safely.