Securit 16mm Brass Plated Roller Ball Door Latch/Catch

How to Use the Securit Brass Plated Bales Catch / Roller Ball Door Latch 16mm

Introduction

The Securit Brass Plated Bales Catch is an essential component for securing doors with a roller ball latch mechanism. This guide will walk you through the process of installing and using the latch effectively.

Tools Required

• Phillips screwdriver
• Drill with drill bits
• Measuring tape
• Pencil or marker
• Chisel (if necessary)

Installation Steps

1. Measure and Mark: Use the measuring tape to determine the correct position for the latch on the door. Mark the spot using a pencil or marker.
2. Drill Pilot Holes: Using the drill, create pilot holes at the marked locations for the screws. This will help ensure accurate placement and prevent wood splitting.
3. Align the Latch: Position the roller ball door latch over the pilot holes, ensuring it is aligned properly with the edge of the door.
4. Secure the Latch: Use the Phillips screwdriver to fasten the screws through the latch into the door, securing it firmly in place.
5. Adjust the Roller Ball: Ensure the roller ball moves freely. If needed, adjust the tension by loosening or tightening the screws slightly.
6. Install the Strike Plate: Align the strike plate on the door frame where the roller ball will make contact. Mark the screw positions, drill pilot holes, and secure the strike plate using screws.
7. Test the Latch: Open and close the door several times to ensure the latch engages and disengages smoothly with the strike plate.

Maintenance Tips

• Regularly check the screws for tightness and re-tighten if necessary.
• Lubricate the roller ball periodically with a suitable lubricant to ensure smooth operation.
• Inspect the latch and strike plate for wear or damage and replace if necessary.

Safety Precautions

• Ensure the door is stable and supported during installation.
• Use proper protective gear such as safety glasses when drilling.
• Follow all tool manufacturer instructions to prevent injury.

Conclusion

By following these steps, you can successfully install and maintain the Securit Brass Plated Bales Catch / Roller Ball Door Latch 16mm, ensuring effective and reliable door security. For further assistance, consult a professional.