ORACSTAR PPC35 25-35MM HOSE CLIP

How to Use the ORACSTAR PPC35 Hose Clip 25-35mm

Introduction

The ORACSTAR PPC35 Hose Clip is a versatile and essential tool for securing hoses with diameters ranging from 25mm to 35mm. Follow these simple instructions to ensure a secure fit.

Tools Required

• ORACSTAR PPC35 Hose Clip 25-35mm
• Screwdriver (flathead or Phillips, depending on the clip type)

Step-by-Step Instructions

Step 1: Prepare the Hose

• Ensure that the hose is clean and free from any debris.
• Check the hose diameter to confirm it falls within the 25-35mm range.

Step 2: Position the Hose Clip

• Slide the ORACSTAR PPC35 hose clip over the end of the hose.
• Position it approximately 5mm from the end of the hose. This ensures a secure grip while avoiding slippage.

Step 3: Tighten the Hose Clip

• Using the appropriate screwdriver, turn the screw on the hose clip clockwise.
• Tighten until the clip is snug around the hose, but be cautious not to overtighten as this can damage the hose.

Step 4: Check the Connection

• After tightening, check the hose to ensure it is firmly held in place by the clip.
• Make sure there is no movement or slipping of the hose within the clip.

Tips for Optimal Use

• Regularly inspect the hose clip for wear and replace it if necessary.
• When removing the clip, turn the screw counterclockwise to loosen it.

Conclusion

By following these instructions, you can effectively use the ORACSTAR PPC35 Hose Clip to secure hoses of various sizes. Proper installation ensures durability and prevents leaks.