FAST PAK VALUE 1819 M6 X 40 NYLON HAMMER FIXINGS, PACK OF 8

How to Use: FAST PAK VALUE 1819 M6 X 40 NYLON HAMMER FIXINGS

Introduction

FAST PAK VALUE 1819 M6 X 40 Nylon Hammer Fixings are designed for securing objects to concrete, brick, or similar materials. Follow the steps below to use these fixings effectively.

Materials Needed

• FAST PAK VALUE 1819 M6 X 40 Nylon Hammer Fixings
• Drill with a 6mm masonry bit
• Hammer
• Screwdriver (optional, depending on the fixing head type)
• Safety goggles

Step-by-Step Instructions

1. Prepare the Surface

• Ensure the surface you are working with is clean and dry.
• Wear safety goggles to protect your eyes from dust and debris.

2. Mark the Drilling Point

• Use a pencil or marker to indicate where you need to install the fixing.
• Double-check the measurements to ensure accuracy.

3. Drill the Hole

• Attach the 6mm masonry bit to your drill.
• Drill a hole at the marked point, ensuring the depth matches the length of the fixing (40mm).
• Clear any dust from the hole to ensure a secure fit.

4. Insert the Fixing

• Place the nylon hammer fixing into the drilled hole.
• If necessary, use a screwdriver to ensure the fixing is aligned correctly.

5. Secure the Fixing

• Use a hammer to gently tap the head of the fixing until it is flush with the surface.
• Ensure the fixing is tightly secured and does not wobble.

Tips for Best Results

• Ensure the drill bit is sharp and suitable for masonry to avoid damaging the surface.
• Do not apply excessive force when hammering the fixing to prevent damage to the nylon.

Safety Warnings

• Always wear protective eyewear when drilling or hammering.
• Keep fingers clear of the hammer’s path to avoid injury.