EVERBUILD STICK 2 MULTI-PURPOSE SUPERGLUE, 3GM TUBE

How to Use EVERBUILD STICK 2 All Purpose Superglue Tube 3GM

Step 1: Prepare the Surfaces

• Ensure the surfaces to be bonded are clean, dry, and free from dust, grease, and other contaminants.
• If necessary, lightly sand the surfaces to create a better bonding area.

Step 2: Open the Superglue Tube

• Carefully twist the cap to open the tube.
• If the tube is new, pierce the nozzle using the cap’s pointed end.

Step 3: Apply the Superglue

• Apply a small amount of superglue to one of the surfaces. A little goes a long way.
• Be cautious to avoid over-application, as excess glue may cause the bond to weaken.

Step 4: Join the Surfaces

• Press the surfaces together immediately and hold firmly for a few seconds.
• Ensure the surfaces are aligned properly, as the bond forms quickly.

Step 5: Allow to Set

• Allow the glued item to rest undisturbed for at least 10-20 minutes to achieve handling strength.
• For best results, let the bond cure for 24 hours.

Safety Precautions

• Avoid contact with skin and eyes. In case of skin contact, wash immediately with soap and water.
• Use in a well-ventilated area to avoid inhaling vapors.
• Keep out of reach of children.

Storage

• After use, close the tube tightly and store in a cool, dry place.