DEKTON Assorted Wet & Dry Sandpaper, 230mm x 280mm, Pack of 10

How to Use DEKTON Wet & Dry Assorted Sandpaper

Step 1: Gather Necessary Materials

• DEKTON Wet & Dry Assorted Sandpaper 230mm x 280mm
• A workpiece or surface to be sanded
• Water (if wet sanding)
• Protective gear (gloves, goggles, dust mask)
• A sanding block or suitable backing pad (optional for better control)

Step 2: Choose the Right Grit

• Coarse grit for removing material or smoothing rough surfaces (e.g., 60-80 grit)
• Medium grit for general-purpose sanding (e.g., 120-150 grit)
• Fine grit for finishing touches and smoothing surfaces (e.g., 220-400 grit)

Step 3: Prepare the Sandpaper

• Cut the sandpaper to a convenient size if necessary.
• If using a sanding block, wrap the sandpaper around the block.
• For wet sanding, slightly moisten the sandpaper with water.

Step 4: Begin Sanding

• Start with the coarsest grit that is suitable for your task.
• Apply even pressure and sand in a back-and-forth motion.
• Follow the grain of the material when sanding wood surfaces.
• Keep the sandpaper wet if performing wet sanding to reduce dust and improve smoothness.

Step 5: Progress Through Grits

• Once satisfied with the coarser grit, switch to a finer grit sandpaper.
• Repeat the sanding process, applying even pressure and consistent motion.
• Continue to progress to finer grits until the desired finish is achieved.

Step 6: Clean the Surface

• Wipe down the sanded area with a damp cloth to remove dust and debris.
• Allow the surface to dry if wet sanding.

Step 7: Finish Up

• Inspect the surface for any areas that may need additional sanding.
• Repeat sanding steps as necessary to achieve a smooth finish.

Enjoy your perfectly sanded surface!