Decorative Pattern PVC Self-Adhesive Wallpaper 45cm x 1.5m

Description

How to Use ADORN PATTERN PVC SELF-ADHESIVE WALLPAPER

Materials Needed

• ADORN PATTERN PVC Self-Adhesive Wallpaper
• Scissors or a utility knife
• Measuring tape
• Smoothing tool or a clean cloth
• Pencil

Step-by-Step Instructions

1. Prepare the Surface

• Ensure the wall surface is clean, dry, and smooth.
• Remove any dust, dirt, or grease from the wall.
• Fill in any holes or cracks and sand the surface if necessary.

2. Measure the Area

• Use the measuring tape to determine the area you wish to cover.
• Mark the measurements on the wall with a pencil.

3. Cut the Wallpaper

• Unroll the wallpaper on a flat surface.
• Measure and mark the desired length for your first strip.
• Use scissors or a utility knife to cut the wallpaper to size.

4. Apply the Wallpaper

• Peel off a small section of the backing paper from the top of the wallpaper.
• Align the wallpaper with the marked area on the wall.
• Press the wallpaper onto the wall, smoothing out air bubbles as you go.
• Gradually peel away more of the backing paper and smooth the wallpaper onto the wall using a smoothing tool or clean cloth.

5. Trim Excess Wallpaper

• Once the wallpaper is applied, use a utility knife to trim any excess material along the edges.

6. Finishing Touches

• Inspect the wallpaper for any air bubbles or imperfections.
• Use the smoothing tool to gently press out any remaining bubbles.

Additional Tips

• Apply the wallpaper when the room temperature is moderate for best results.
• Work slowly to ensure precise alignment and application.
• If repositioning is needed, gently peel back the wallpaper and adjust before pressing firmly again.