Adorn Marble-Patterned Self-Adhesive PVC Wallpaper, 45cm x 1.5m

How to Use ADORN MARBLE PVC SELF-ADHESIVE WALLPAPER

Materials Needed

• ADORN Marble PVC Self-Adhesive Wallpaper
• Scissors or a utility knife
• Ruler or measuring tape
• Smoothing tool or a squeegee
• Clean cloth

Preparation

1. Ensure the surface where the wallpaper will be applied is clean, dry, and smooth.
2. Measure the surface area to determine how much wallpaper you will need.
3. Cut the wallpaper to the desired size using scissors or a utility knife.

Application

1. Peel a small section of the backing paper away from the wallpaper.
2. Align the wallpaper with the edge of the surface you are covering.
3. Gradually peel away more of the backing while smoothing the wallpaper onto the surface with your hand or a smoothing tool.
4. Remove any air bubbles by pressing them out towards the edges.

Finishing Touches

1. Trim any excess wallpaper along the edges using a utility knife for a clean finish.
2. Wipe the surface with a clean cloth to remove any fingerprints or dust.

Troubleshooting Tips

• If the wallpaper is not sticking properly, ensure the surface is free of dust and grease.
• If you make a mistake, gently peel back the wallpaper and reapply.
• For stubborn air bubbles, use a pin to puncture and release trapped air.