Wooden PVC Self-Adhesive Wallpaper by ADORN – 45cm x 1.5m

Description

How to Use ADORN WOODEN PVC SELF-ADHESIVE WALLPAPER

Step 1: Gather Your Materials

• ADORN Wooden PVC Self-Adhesive Wallpaper
• Measuring tape
• Scissors or a utility knife
• Squeegee or flat edge tool
• Soft cloth

Step 2: Prepare the Surface

1. Ensure the surface is smooth, clean, and dry.
2. Remove any dust, dirt, or grease from the surface.
3. If necessary, sand down any rough areas to ensure adhesion.

Step 3: Measure and Cut the Wallpaper

1. Use a measuring tape to measure the area where the wallpaper will be applied.
2. Cut the wallpaper to the desired length, allowing a little extra for trimming.

Step 4: Apply the Wallpaper

1. Peel off a small section of the backing paper from the top of the wallpaper.
2. Align the top of the wallpaper with the top of your surface.
3. Press the exposed adhesive section onto the surface.
4. Slowly peel away more of the backing paper while smoothing the wallpaper onto the surface with a squeegee or flat edge tool.
5. Work from the top down, eliminating any air bubbles by pressing from the center outwards.

Step 5: Finish and Trim

1. Once the wallpaper is fully applied, use a utility knife or scissors to trim any excess material.
2. Use a soft cloth to wipe down the surface, ensuring it is securely adhered and smooth.

Step 6: Enjoy Your New Look

Stand back and admire the refreshed look of your space with the ADORN Wooden PVC Self-Adhesive Wallpaper!