Wallpaper Seam Roller with Soft Grip Handle by Fit for the Job

Description

How to Use the FIT FOR THE JOB Wallpaper Seam Roller

Step 1: Gather Your Materials

• Wallpaper seam roller with soft grip handle
• Wallpaper
• Adhesive or wallpaper paste
• Wallpaper smoothing tool
• Clean cloth or sponge

Step 2: Prepare Your Surface

1. Ensure the wall is clean, dry, and smooth.
2. Remove any old wallpaper and repair any imperfections on the wall.
3. Apply a primer if necessary and allow it to dry completely.

Step 3: Apply the Wallpaper

1. Cut the wallpaper to the desired size, leaving a little extra on each edge for trimming.
2. Apply the adhesive or paste to the back of the wallpaper, following the manufacturer’s instructions.
3. Carefully position the wallpaper on the wall, starting from the top and smoothing downwards.

Step 4: Use the Seam Roller

1. Once the wallpaper is in place, use the wallpaper smoothing tool to remove any air bubbles.
2. Gently roll the seam roller along the seams where two pieces of wallpaper meet.
3. Apply even pressure to ensure the edges are firmly adhered to the wall.
4. Be cautious not to press too hard to avoid damaging the wallpaper.

Step 5: Finish Up

1. Use a clean cloth or sponge to wipe away any excess adhesive.
2. Trim any excess wallpaper at the edges using a sharp knife or scissors.
3. Allow the wallpaper to dry completely according to the adhesive manufacturer’s instructions.

Tips for Best Results

• Work in a well-lit area to see the seams clearly.
• Ensure the roller is clean and free of adhesive residue before starting.
• Practice on a spare piece of wallpaper if you are new to using a seam roller.