TOWER CERAGLIDE ELITE 2-IN-1 CORDLESS STEAM IRON

Description

How to Use the TOWER 2 IN 1 CERAGLIDE ELITE CORDLESS STEAM IRON

Step 1: Unboxing and Initial Setup

• Carefully remove the steam iron from its packaging.
• Ensure all components are present, including the iron, charging base, and any instruction manuals.
• Place the charging base on a stable, flat surface near a power outlet.

Step 2: Charging the Iron

• Plug the charging base into the power outlet.
• Place the iron onto the charging base to begin charging.
• Allow the iron to fully charge before first use; refer to the manual for approximate charging time.

Step 3: Filling the Water Tank

• Ensure the iron is unplugged and cool before filling the water tank.
• Open the water tank cover, usually located near the handle.
• Fill the tank with clean water up to the indicated maximum level.
• Close the water tank cover securely.

Step 4: Selecting the Temperature and Steam Settings

• Set the desired temperature using the temperature control dial, typically located on the handle or base of the iron.
• Select the steam output level using the steam control dial or button.

Step 5: Ironing Your Garments

• Once the iron is fully charged and heated, remove it from the charging base.
• Place your garment on an ironing board.
• Begin ironing, moving the iron smoothly over the fabric.
• For stubborn wrinkles, use the steam burst feature by pressing the steam button.

Step 6: Safety and Maintenance

• Always turn off and unplug the iron when not in use.
• Empty the water tank after each use to prevent mineral buildup.
• Wipe the soleplate with a damp cloth if needed, ensuring it is cool and unplugged.

Troubleshooting

• If the iron does not heat, ensure it is properly charged and the power outlet is functioning.
• If no steam is produced, check that the water tank is filled and the steam setting is correctly adjusted.

For further assistance, consult the instruction manual provided with your product.