The Elpine BC Battern Lampholder 3 Terminal Straight Skirt comes in a case of 10 units. These lampholders are designed for use with bayonet cap (BC) bulbs and feature a straight…

How to Use the Elpine BC Battern Lampholder

Introduction

The Elpine BC Battern Lampholder 3 Terminal Straight Skir is designed to securely hold bayonet cap bulbs. This guide will help beginners install and use this product effectively.

Contents of the Package

• 10 x Elpine BC Battern Lampholders

Tools Required

• Screwdriver
• Wire stripper/cutter

Safety Precautions

• Ensure the power is turned off before starting the installation.
• Use insulated tools to prevent electric shocks.
• Confirm compatibility of the lampholder with your existing wiring.

Installation Steps

1. Turn Off Power: Make sure the power supply to the light fixture is switched off at the circuit breaker.
2. Prepare the Wires: Use the wire stripper to strip about 1 cm of insulation from the end of each wire.
3. Attach the Lampholder:
   • Locate the three terminals on the lampholder.
   • Connect the live wire to the terminal marked “L”.
   • Connect the neutral wire to the terminal marked “N”.
   • Connect the earth wire (if applicable) to the terminal marked “E” or the earth symbol.
4. Secure the Lampholder: Attach the lampholder to the desired surface using screws and ensure it is firmly secured.
5. Insert the Bulb: Insert a bayonet cap bulb into the lampholder and twist until it clicks into place.
6. Test the Installation: Restore power and test the light to ensure proper installation.

Troubleshooting Tips

• If the light does not turn on, double-check the wiring connections.
• Ensure the bulb is correctly inserted and not faulty.
• Verify that the power supply is active.

Conclusion

By following these steps, you should be able to successfully install and use your Elpine BC Battern Lampholder. Always remember to prioritize safety during the installation process.