STATUS SINGLE 1 GANG 13A DOUBLE POLE SWITCHED WALL OUTLET

How to Use the STATUS SINGLE / 1 GANG 13A DOUBLE POLE SWITCHED WALL SOCKET

Introduction

This guide will walk you through the steps to safely and effectively use the STATUS SINGLE / 1 GANG 13A DOUBLE POLE SWITCHED WALL SOCKET.

Safety Precautions

• Ensure you are over the age of 18 to handle electrical components.
• Make sure the power supply is turned off before installation or maintenance.
• Use insulated tools to avoid electric shocks.

Installation

1. Locate the desired position on the wall where you wish to install the socket.
2. Turn off the main electrical supply to the circuit where the socket will be installed.
3. Remove the faceplate of the existing socket, if applicable.
4. Disconnect the wires from the old socket.
5. Connect the wires to the terminals of the new STATUS socket. Ensure wires are securely fastened:
• Live wire (brown or red) to the ‘L’ terminal.
• Neutral wire (blue or black) to the ‘N’ terminal.
• Earth wire (green/yellow) to the ‘E’ terminal.
6. Secure the socket to the wall using screws, ensuring it is flush with the wall surface.
7. Attach the faceplate onto the socket and screw it into place.

Usage

1. Turn the power supply back on at the main circuit breaker.
2. Plug an electrical device into the socket.
3. Switch the socket on using the switch located on the faceplate.
4. Ensure the device is functioning as expected.

Maintenance

• Regularly check the socket for any signs of wear or damage.
• Do not overload the socket to prevent electrical hazards.
• If the socket becomes damaged, turn off the power supply and consult a qualified electrician.

Troubleshooting

• If the socket does not work, check the circuit breaker and ensure it is switched on.
• Confirm that the device being plugged in is functioning properly.
• If issues persist, consult a qualified electrician.

Conclusion

By following these instructions, you should be able to safely use the STATUS SINGLE / 1 GANG 13A DOUBLE POLE SWITCHED WALL SOCKET. If you have any concerns or questions, please consult a professional.