STATUS ANGLED BAYONET BC B22 CEILING LAMP HOLDER SOCKET

Description

How to Use the STATUS Angled Bayonet BC B22 Batten Ceiling Lamp Holder Socket

Introduction

The STATUS Angled Bayonet BC B22 Batten Ceiling Lamp Holder Socket is designed for easy installation and use with B22 bayonet cap bulbs. Follow these instructions to safely and effectively use this product.

Materials Needed

• STATUS Angled Bayonet BC B22 Batten Ceiling Lamp Holder Socket
• B22 bayonet cap bulb
• Compatible electrical wiring
• Screwdriver
• Ladder (if needed for ceiling installation)
• Protective gloves

Safety Precautions

1. Ensure the power supply to the installation area is turned off before starting.
2. Wear protective gloves to safeguard against electrical shocks and sharp edges.
3. Ensure you are working in a well-lit environment.

Installation Instructions

1. Turn off the power supply to the ceiling light fixture from the main electrical panel.
2. Remove the existing lamp holder, if applicable.
3. Connect the electrical wires to the terminals on the STATUS Lamp Holder Socket. Ensure that the live, neutral, and ground wires are correctly connected.
4. Secure the lamp holder to the ceiling using screws, making sure it is firmly attached.
5. Insert a B22 bayonet cap bulb into the socket by aligning the bulb’s pins with the bayonet slots, then push and twist to secure.

Testing

1. Once the installation is complete, switch the power supply back on from the main electrical panel.
2. Turn on the light switch to test the installation. The bulb should light up if installed correctly.
3. If the bulb does not light up, turn off the power supply and check the wiring connections.

Maintenance Tips

• Regularly check the bulb and lamp holder for signs of wear or damage.
• Ensure the bulb is securely fitted to prevent flickering or poor contact.
• Replace any damaged components immediately to prevent electrical hazards.

By following these instructions, you can safely install and use the STATUS Angled Bayonet BC B22 Batten Ceiling Lamp Holder Socket. Always prioritize safety and consult a professional electrician if you are unsure about any step in the installation process.