Starpack Black Self-Adhesive Number 8, 75mm, Pack of 3

Description

How to Use the STARPACK BLACK SELF ADHESIVE NUMBER 8 75MM 3/PK

Step 1: Prepare the Surface

• Ensure the surface where you intend to apply the number is clean and dry.
• Wipe the area with a clean cloth to remove any dust or debris.
• Allow the surface to fully dry before proceeding to the next step.

Step 2: Plan the Placement

• Decide on the exact location where you want to place the number.
• Use a ruler or measuring tape to determine the center point if precise alignment is necessary.
• Mark the placement lightly with a pencil if needed.

Step 3: Apply the Adhesive Number

• Peel the backing off the adhesive number carefully to avoid touching the sticky side.
• Align the number with your marked placement or desired position.
• Press the number firmly onto the surface, starting from one edge and working your way across to prevent air bubbles.

Step 4: Secure the Adhesion

• Once the number is in place, run your fingers over it to ensure it is adhering well.
• Pay special attention to the edges, pressing them firmly to ensure they do not lift over time.

Step 5: Allow Time for Adhesion

• Leave the number undisturbed for at least 24 hours to allow the adhesive to fully bond with the surface.
• Avoid exposing the number to water or excessive moisture during this time.

Troubleshooting

• If the number does not stick properly, ensure the surface is completely dry and free from any residue.
• Consider using a different area with a smoother texture for better adhesion.