STARPACK Appliance Trap Blanking Cap and Washer – Single Pack

Description

How to Use the Starpack Appliance Trap Blanking Cap and Washer

Introduction

The Starpack Appliance Trap Blanking Cap and Washer is designed to seal off unused trap inlets in plumbing systems. Follow these instructions to ensure proper installation and usage.

Tools Required

• Wrench or adjustable spanner
• Pipe cleaner or cloth

Safety Precautions

• Ensure the water supply is turned off before starting the installation.
• Wear gloves to protect your hands during installation.

Installation Instructions

1. Identify the unused trap inlet where the blanking cap will be installed.
2. Clean the inlet thoroughly using a pipe cleaner or cloth to remove any debris or residue.
3. Place the washer onto the blanking cap if not pre-attached.
4. Align the blanking cap with the inlet and hand-tighten to secure it in place.
5. Use a wrench or adjustable spanner to gently tighten the cap further, ensuring it is snug but not overtightened.

Final Checks

• Turn on the water supply and check for any leaks around the blanking cap.
• If leaks are detected, gently tighten the cap further or inspect the washer for any damage.
• Ensure the cap is securely fitted and there is no movement.

Maintenance

• Periodically check the cap for signs of wear or leaks.
• Replace the washer if any deterioration is detected to maintain a proper seal.

Troubleshooting

• If the cap is difficult to tighten, ensure the threads are clean and free from debris.
• If the cap does not fit, verify that it is the correct size for your trap inlet.

By following these instructions, you can effectively use the Starpack Appliance Trap Blanking Cap and Washer for your plumbing needs.