Star Pack of 8 Poly Toggles for 9mm-13mm Thick Plasterboard

Description

How to Use STAR PACK 8 Poly Toggles for Plasterboard 9mm-13mm Thick

Introduction

The STAR PACK 8 Poly Toggles are designed for securely fastening items to plasterboard with a thickness of 9mm to 13mm. Follow these steps to ensure proper installation and use.

Tools and Materials Needed

• Drill
• Drill bit (appropriate size for the toggle)
• Screwdriver
• Pencil
• Tape measure
• STAR PACK 8 Poly Toggles

Step-by-Step Instructions

1. Mark the Location

• Use a tape measure to determine the exact spot on the plasterboard where you need to install the toggle.
• Mark the location with a pencil.

2. Drill the Hole

• Select a drill bit that matches the size of the toggle anchor.
• Drill a hole at the marked location in the plasterboard.

3. Insert the Poly Toggle

• Fold the toggle wings together and insert them into the drilled hole.
• Push the toggle all the way in until the wings spring open behind the plasterboard.

4. Secure the Toggle

• Pull back gently on the toggle to ensure the wings are fully engaged behind the plasterboard.
• Insert the screw into the toggle and tighten using a screwdriver until it is flush with the wall.

5. Final Check

• Ensure the toggle is securely fastened to the plasterboard.
• Verify that the mounted item is stable and properly supported.

Safety Tips

• Always wear safety goggles when drilling.
• Ensure the plasterboard is free from electrical wires and plumbing before drilling.