Star Pack Dual Hose Clamp 25mm – 35mm

Description

How to Use the STAR PACK 2 Hose Clip 25mm – 35mm

Introduction

The STAR PACK 2 Hose Clip is designed to secure hoses with a diameter between 25mm and 35mm. Follow these instructions to ensure proper installation and use.

Materials Needed

• STAR PACK 2 Hose Clip
• Compatible hose (25mm – 35mm in diameter)
• Flathead screwdriver or a suitable tool for tightening

Installation Steps

1. Prepare the Hose: Ensure that the hose is clean and dry to provide an optimal surface for the hose clip.
2. Position the Hose Clip: Slide the hose clip over the hose to the desired location where it will secure the hose to a fitting or connector.
3. Align the Clip: Make sure the screw mechanism is easily accessible for tightening.
4. Tighten the Clip: Use a flathead screwdriver to turn the screw clockwise. Tighten until the hose is firmly secured, but be careful not to overtighten, as this may damage the hose.
5. Check the Connection: Verify that the hose is securely attached and does not move when gently pulled.

Safety Tips

• Avoid overtightening to prevent hose damage.
• Regularly inspect the hose clip for signs of wear or corrosion.
• Replace the hose clip if it shows signs of damage or if the hose becomes loose.

Maintenance

To ensure longevity and reliable performance, periodically check the hose clip for tightness and signs of wear. Clean if necessary to prevent rust or corrosion.