STAR PACK 4 Nylon Cavity Plugs with Redi-Driva & Screw, 32mm

Description

How to Use the STAR PACK 4 REDI-DRIVA & SCREW CAVITY PLUG NYLON 32MM

Introduction

The STAR PACK 4 REDI-DRIVA & SCREW CAVITY PLUG NYLON 32MM is designed for easy installation in plasterboard and other cavity walls. Follow these steps to ensure proper installation.

Materials Needed

• STAR PACK 4 REDI-DRIVA & SCREW CAVITY PLUG NYLON 32MM
• Drill
• Screwdriver
• Pencil
• Measuring Tape

Steps for Installation

Step 1: Mark the Spot

• Use the measuring tape to find the exact spot on the wall where you want to install the plug.
• Mark the spot with a pencil.

Step 2: Drill a Pilot Hole

• Select a drill bit that is slightly smaller than the diameter of the REDI-DRIVA.
• Drill a pilot hole at the marked spot.

Step 3: Insert the REDI-DRIVA

• Align the pointed end of the REDI-DRIVA with the pilot hole.
• Use a screwdriver to screw the REDI-DRIVA into the wall until it is flush with the surface.

Step 4: Screw in the Cavity Plug

• Position the nylon cavity plug over the REDI-DRIVA.
• Insert the screw into the cavity plug.
• Tighten the screw with a screwdriver until secure.

Conclusion

Once installed, the REDI-DRIVA & SCREW CAVITY PLUG provides a strong and reliable fixture in your wall. Ensure all components are securely fastened.