STAR PACK 16 Heavy Duty Rimless Wall Plugs, Grey Nylon, M8 x 40mm

How to Use STAR PACK 16 Rimless Wall Plug Heavy Duty Grey Nylon M8 x 40mm

Materials Needed

• Drill with appropriate drill bit
• Screwdriver
• Hammer (optional)
• STAR PACK 16 Rimless Wall Plug
• Compatible screws

Step-by-Step Instructions

Step 1: Determine Placement

• Identify the location where you intend to place the wall plug.
• Ensure it is suitable for supporting the intended load.

Step 2: Drill the Hole

• Select a drill bit that matches the diameter of the wall plug (8mm in this case).
• Drill a hole into the wall at the desired location.
• The hole should be drilled to a depth of approximately 40mm to accommodate the plug.

Step 3: Insert the Wall Plug

• Gently insert the rimless wall plug into the drilled hole.
• If necessary, use a hammer to tap the plug lightly until it is flush with the wall surface.

Step 4: Insert the Screw

• Choose a compatible screw that matches the plug size.
• Align the object you wish to attach over the wall plug.
• Insert the screw through the object into the wall plug.
• Use a screwdriver to tighten the screw securely but avoid overtightening.

Safety Tips

• Always wear safety goggles when drilling.
• Ensure the wall structure is suitable for drilling and supports the load.

Troubleshooting

• If the wall plug is loose, check if the hole is too large and consider using a larger plug.
• If the screw does not fit, ensure it matches the size and type recommended for the plug.