**Solar Powered**: This light is equipped with solar panels, meaning it charges during the day using sunlight and operates without needing to be plugged into an electrical…

How to Use the Ever Brite LED Light Motion Sensor

Installation

1. Choose a location where the light will receive sufficient sunlight during the day. This will ensure the solar panel charges effectively.
2. Ensure the mounting surface is clean and dry.
3. Use the screws provided in the package to mount the light onto the wall or fence.
4. Adjust the angle of the solar panel if necessary to maximize sunlight exposure.

Activation

1. Locate the power button on the light. It is usually on the front or underside of the unit.
2. Press the button to turn the light on. You may need to press it multiple times to cycle through different modes.
3. Once activated, the motion sensor will automatically turn on the light when movement is detected within its range.

Modes and Settings

• Motion Detection Mode: The light will turn on when motion is detected and turn off after a set period of time without movement.
• Always On Mode: The light remains on continuously, which may reduce battery life.
• Off Mode: Turns the light off completely, conserving battery.

Maintenance

• Regularly clean the solar panel with a damp cloth to remove dust and debris, ensuring optimal charging efficiency.
• Inspect the light for any damage or wear and replace batteries if necessary.
• Check the screws occasionally to ensure the light remains securely mounted.

Troubleshooting

• If the light does not turn on, ensure the solar panel is receiving adequate sunlight during the day.
• Verify that the power button has been pressed to activate the desired mode.
• Check the battery and replace it if the light’s performance is poor.