SHAW X Zinc-Plated Sawtooth Hangers, Pack of 5

Description

How to Use SHAW X Zinc Plated Saw Tooth Hangers

Introduction

SHAW X Zinc Plated Saw Tooth Hangers are a simple and effective way to hang frames and artwork. Follow these instructions to securely attach the hangers.

Materials Needed

• SHAW X Zinc Plated Saw Tooth Hangers (5 per pack)
• Hammer
• Nails (usually included with the hangers)
• Measuring tape
• Pencil

Steps to Use Saw Tooth Hangers

1. Prepare the Frame

• Place the frame face down on a flat surface.

2. Measure and Mark

• Use a measuring tape to find the center of the top edge of the frame.
• Mark the center point lightly with a pencil.

3. Attach the Saw Tooth Hanger

• Place the saw tooth hanger over the marked center point.
• Ensure the teeth of the hanger face downwards.

4. Secure the Hanger

• Insert a nail through each hole on the saw tooth hanger.
• Gently hammer the nails into the frame, ensuring the hanger is level.

5. Hang Your Frame

• Choose the location on the wall where you want to hang the frame.
• Hammer a nail or hook into the wall at the desired height.
• Hang the frame by hooking the saw tooth hanger onto the wall nail or hook.

Conclusion

With these steps, your artwork or frames should be securely hung on the wall. Always ensure the hanger is properly attached and the wall fixture is secure to prevent accidents.