SHAW X NO.2 Brass-Plated Picture Wire 3M Supports Up to 11kg/24lbs

Description

How to Use SHAW X NO.2 Brass Plated Picture Wire

Materials Needed

• SHAW X NO.2 Brass Plated Picture Wire
• Picture hooks or nails
• Picture frame
• Wire cutters or scissors
• Measuring tape
• Pencil

Step-by-Step Instructions

Step 1: Measure the Picture Frame

• Use the measuring tape to determine the width of the picture frame.
• Note down the measurement for reference.

Step 2: Cut the Picture Wire

• Unroll the SHAW X NO.2 brass plated picture wire.
• Add an extra 12-15 inches (30-38 cm) to the frame width measurement for tying and adjustments.
• Use wire cutters or scissors to cut the wire to the desired length.

Step 3: Attach the Wire to the Frame

• Locate the hooks or D-rings on the back of the picture frame.
• Thread one end of the wire through one of the hooks or D-rings.
• Twist the wire around itself several times to secure it.
• Repeat the process on the other side, ensuring the wire has a slight slack for stability.

Step 4: Prepare the Wall

• Decide where you want to hang your picture.
• Use a pencil to lightly mark the spot on the wall where the picture wire will rest.
• Hammer in a picture hook or nail at the marked spot.

Step 5: Hang the Picture

• Lift the picture frame and place the wire over the hook or nail on the wall.
• Adjust the picture to ensure it is level and secure.

Safety Tips

• Ensure the wire is properly secured to prevent the picture from falling.
• Always use appropriate picture hooks or nails that can support the weight of your picture.
• Check the weight capacity of the wire (up to 11kg/24lbs) to ensure it is suitable for your frame.