SHAW X NO.1 Brass-Plated Picture Wire 3M, Supports Up to 6kg/13lbs

Description

How to Use SHAW X NO.1 Brass Plated Picture Wire

Materials Needed

• SHAW X NO.1 Brass Plated Picture Wire (3M)
• Picture frame or artwork
• Measuring tape
• Wire cutters or scissors
• Eye hooks or D-rings
• Screwdriver
• Wall hooks or nails

Step-by-Step Instructions

Step 1: Measure and Cut the Wire

1. Measure the width of the picture frame or artwork.
2. Add extra length for hanging and cut the wire to size using wire cutters or scissors.

Step 2: Attach Eye Hooks or D-rings

1. Position the eye hooks or D-rings on each side of the frame, approximately one-third down from the top.
2. Screw the eye hooks or D-rings into place using a screwdriver.

Step 3: Attach the Wire

1. Thread one end of the wire through an eye hook or D-ring.
2. Twist the wire back around itself to secure it.
3. Repeat with the other end of the wire on the opposite side, ensuring the wire is taut but not overly tight.

Step 4: Hang Your Picture

1. Select a suitable location on the wall for hanging your picture.
2. Install wall hooks or nails at the desired height.
3. Hang the picture by placing the wire over the wall hooks or nails.

Important Tips

• Ensure that the total weight of the picture does not exceed 6kg (13lbs).
• Double-check that the wire is securely fastened before hanging the picture.
• Use appropriate wall hooks or nails to support the weight of your frame.