SHAW X Brass-Plated Slotted Glass/Frame Plates 50mm, Pack of 2

Description

How to Use SHAW X Brassed Plated Slotted Glass/Frame Plates

Introduction

These instructions will guide you on how to use the SHAW X Brassed Plated Slotted Glass/Frame Plates effectively.

What’s Included

• 2 x Brassed Plated Slotted Glass/Frame Plates (50mm each)

Step-by-Step Instructions

1. Preparation

• Ensure you have all necessary tools, such as a screwdriver and screws compatible with the plates.
• Verify the surface you are working on is clean and dry.

2. Positioning the Plate

• Place the glass/frame plate in the desired position on the frame or glass.
• Align the slots according to the design or structural requirement.

3. Securing the Plate

• Insert the screws through the slots in the plate.
• Tighten the screws using a screwdriver, ensuring the plate is secure but taking care not to overtighten and damage the plate.

4. Final Checks

• Inspect the plate to ensure it is firmly attached and aligned correctly.
• Make any necessary adjustments for a perfect fit.

Troubleshooting

• If the plate does not fit properly, double-check the measurements and alignment.
• Ensure the screws are the correct size for the slots and the surface material.

Safety Tips

• Wear protective gloves to avoid injury during installation.
• Handle the glass with care to prevent damage or injury.

Conclusion

By following these steps, you should be able to successfully use the SHAW X Brassed Plated Slotted Glass/Frame Plates to enhance your project.