Set of 12 Korbond Dark Mix Thread Bobbins – 32m Each

Description

How to Use 12 Korbond Dark Mix Thread Selection Bobbins

Step-by-Step Instructions

1. Prepare Your Sewing Machine

• Ensure your sewing machine is turned off and unplugged.
• Lift the presser foot and needle to their highest positions.

2. Select the Thread

• Choose a bobbin from the 12 Korbond Dark Mix Thread Selection that matches or complements your fabric.
• Place the chosen bobbin on the bobbin winder spindle of your sewing machine.

3. Wind the Bobbin

• Follow your sewing machine’s instructions to wind the thread from the spool onto the bobbin.
• Ensure the bobbin is wound evenly and not too tightly.

4. Load the Bobbin

• Remove the bobbin from the winder and place it in the bobbin case.
• Insert the bobbin case into the sewing machine, making sure it is secure.

5. Thread the Sewing Machine

• Consult your sewing machine’s manual to thread the upper part of the machine.
• Pull the thread from the bobbin through the machine’s lower threading path.

6. Test the Tension

• Sew a test stitch on a scrap piece of fabric to check the tension.
• Adjust the tension settings on your machine if necessary.

7. Start Sewing

• Once everything is set up, you can begin sewing your project.
• Monitor the bobbin thread periodically and replace it when it runs out.

8. Store the Bobbins

• After finishing your project, store the bobbins back in their case to keep them organized.