Self-Adhesive Hook and Loop Fastener

How to Use Hook Loop Self Adhesive Sticky Hook

Materials Needed

• Hook Loop Self Adhesive Sheets
• Scissors (optional)
• Cleaning cloth or alcohol wipes

Instructions

Step 1: Prepare the Surface

• Clean the surface where you plan to stick the adhesive sheet using a cleaning cloth or alcohol wipes.
• Ensure the surface is dry and free from dust, grease, or any other debris.

Step 2: Cut the Sheets (if necessary)

• Measure the area where you want to apply the adhesive sheet.
• Use scissors to cut the sheet to the desired size if needed.

Step 3: Apply the Adhesive Sheet

• Peel off the protective backing from the adhesive side of the sheet.
• Carefully position the adhesive sheet onto the prepared surface.
• Press firmly across the entire sheet to ensure a good bond.

Step 4: Attach the Corresponding Piece

• Take the corresponding hook or loop piece and remove its protective backing.
• Align it with the applied adhesive sheet and press firmly to secure.

Step 5: Test the Bond

• Gently tug on the attached item to ensure the adhesive has created a strong bond.
• If the bond is not secure, press down again firmly and ensure the surface is clean.

Tips

• Allow the adhesive to cure for a few hours for maximum strength.
• Avoid repositioning the sheets frequently to maintain adhesive strength.