SECURIT S6341 Zinc-Plated 75mm Gate Hook & Eye Set, Pack of 2

How to Use SECURIT S6341 Gate Hook & Eye Zinc Plated 75mm

Introduction

The SECURIT S6341 Gate Hook & Eye is designed for securing gates, doors, and shutters. This product is zinc plated for durability and comes in a pack of two. Follow the steps below to install and use the gate hook and eye effectively.

Tools Required

• Drill
• Screwdriver
• Pencil or Marker
• Measuring Tape

Installation Instructions

1. Choose the Installation Location:
   • Select a suitable location on the gate and post where the hook and eye will be installed.
   • Ensure the location allows the gate to be securely closed.
2. Mark the Drill Points:
   • Use a measuring tape to determine the exact position for the hook and eye.
   • Mark the positions with a pencil or marker.
3. Drill Holes:
   • Use the drill to create holes at the marked positions.
   • Ensure the holes are slightly smaller than the screws provided for a snug fit.
4. Attach the Eye:
   • Position the eye on the gate post or frame.
   • Secure it in place using screws and a screwdriver.
5. Attach the Hook:
   • Align the hook with the eye on the gate.
   • Secure it with screws using the screwdriver.

Usage Instructions

1. Close the Gate: Swing the gate to the closed position.
2. Secure the Gate: Insert the hook into the eye to secure the gate.
3. Open the Gate: Lift the hook out of the eye to open the gate.

Maintenance Tips

• Regularly check the hook and eye for any signs of wear or corrosion.
• Tighten any loose screws to ensure the hook and eye remain secure.
• Apply lubricant if the mechanism becomes stiff.

By following these instructions, you can ensure the SECURIT S6341 Gate Hook & Eye is installed and used effectively to secure your gate.