SECURIT S5560 CENTER BRACKET 25MM – CHROME FINISH

Description

How to Use the SECURIT S5560 Centre Bracket Chrome 25mm

Introduction

The SECURIT S5560 Centre Bracket is an essential component used for supporting curtain poles or rods. Follow these instructions to install and use the bracket effectively.

Tools and Materials Needed

• Drill
• Screwdriver
• Measuring tape
• Pencil
• Level
• Screws (usually included with the bracket)
• Wall plugs (if necessary)

Installation Instructions

Step 1: Measure and Mark

1. Decide the position where you want to install the centre bracket. Usually, this is the midpoint for long curtain rods to prevent sagging.
2. Use a measuring tape and a pencil to mark the desired height and position on the wall.
3. Ensure the mark is level using a level tool.

Step 2: Drill Holes

1. Using a drill, create holes on the marked spots.
2. If your wall requires it, insert wall plugs into the holes for added support.

Step 3: Attach the Bracket

1. Align the SECURIT S5560 Centre Bracket with the drilled holes.
2. Use a screwdriver to secure the bracket onto the wall with the provided screws.
3. Ensure the bracket is tightly secured and level.

Step 4: Mount the Curtain Rod

1. Place the curtain rod into the SECURIT S5560 Centre Bracket.
2. Ensure the rod is evenly distributed and securely resting on the bracket.

Conclusion

With these steps, your SECURIT S5560 Centre Bracket Chrome 25mm should be successfully installed, providing support for your curtain rod. Ensure all components are securely fastened to avoid accidents or damage.