SECURIT S5433 WHITE HEAVY-DUTY MAGNETIC CATCH, 60MM

How to Use the SECURIT S5433 Heavy Magnetic Catch

Introduction

The SECURIT S5433 Heavy Magnetic Catch is designed to securely hold doors or panels in place using magnetic force. This guide will help beginners understand how to install and use this product effectively.

Tools Required

• Drill
• Screwdriver
• Measuring tape
• Pencil or marker
• Level

Installation Steps

1. Position the Catch:
   • Decide where you want to install the magnetic catch.
   • Use a measuring tape to ensure the position is correct.
   • Mark the positions for screws on the door or panel and the frame.
2. Drill Pilot Holes:
   • Using a drill, create pilot holes at the marked locations for easier screw installation.
   • Be careful not to drill too deep.
3. Attach the Magnetic Catch:
   • Align the magnetic catch with the pilot holes on the frame.
   • Use screws to secure the catch in place.
   • Ensure it is level and firmly attached.
4. Attach the Strike Plate:
   • Position the strike plate on the door or panel, aligning it with the magnetic catch.
   • Screw the strike plate into place using the pilot holes.
5. Test the Magnetic Catch:
   • Close the door or panel to ensure the magnetic catch holds it securely.
   • Adjust the positioning if necessary for optimal hold.

Tips for Use

• Ensure surfaces are clean and dry before installation for the best adhesion.
• Check the alignment regularly to ensure continued effectiveness.
• Use a stronger magnet or additional catches for larger or heavier doors.

Safety Precautions

• Wear protective eyewear when drilling.
• Keep fingers clear of the catch when closing the door to prevent pinching.