SECURIT S5431 40MM White Magnetic Catch, Pack of 3

How to Use the Securit S5431 Magnetic Catch

Introduction

The Securit S5431 Magnetic Catch is designed to keep doors, cabinets, or drawers securely closed using magnets. Each pack contains three magnetic catches, each measuring 40mm in length.

Tools Required

• Drill
• Screwdriver
• Measuring tape
• Pencil

Installation Steps

Step 1: Determine Placement

1. Identify the location where you want to install the magnetic catch. This is usually on the inner edge of a cabinet or drawer.
2. Use the measuring tape and pencil to mark the desired position for both the catch and the strike plate.

Step 2: Install the Magnetic Catch

1. Align the magnetic catch with the marked position on the frame of the cabinet or drawer.
2. Using the drill, create pilot holes for the screws to prevent wood splitting.
3. Screw the magnetic catch into place using a screwdriver.

Step 3: Attach the Strike Plate

1. Position the strike plate on the door or drawer so that it aligns with the magnetic catch when closed.
2. Mark the screw holes for the strike plate and drill pilot holes.
3. Secure the strike plate with screws using the screwdriver.

Step 4: Test the Catch

• Close the door or drawer to ensure the magnetic catch and strike plate align properly and hold securely.
• If necessary, adjust the positioning by loosening the screws and repositioning either the catch or the plate.

Tips for Best Results

• Ensure both the catch and the strike plate are aligned for optimal performance.
• Regularly check the tightness of the screws to maintain functionality.

Conclusion

With these simple steps, the Securit S5431 Magnetic Catch can be effectively installed to keep your cabinets and drawers securely closed.