SECURIT S5430 WHITE 40MM MAGNETIC CATCH

How to Use the SECURIT S5430 Magnetic Catch White 40mm

Step 1: Unpack the Product

• Carefully remove the magnetic catch from its packaging.
• Ensure all components, such as screws and mounting plates, are included.

Step 2: Identify the Installation Location

• Decide where you wish to install the magnetic catch, such as on a cabinet or door.
• Ensure the surface is clean and free of debris for optimal adhesion.

Step 3: Mount the Magnetic Catch

• Position the magnetic catch on the desired surface.
• Use a pencil to mark the screw holes for precise drilling.
• Drill pilot holes into the marked positions.

Step 4: Secure the Magnetic Catch

• Align the magnetic catch with the drilled holes.
• Insert the screws into the holes and tighten using a screwdriver until secure.

Step 5: Attach the Counter Plate

• Close the cabinet or door to determine the location for the counter plate.
• Mark the position for the counter plate using a pencil.
• Drill pilot holes if necessary.
• Secure the counter plate with screws.

Step 6: Test the Magnetic Catch

• Open and close the cabinet or door to ensure the magnetic catch is functioning properly.
• Adjust the positioning if necessary for optimal performance.

Additional Tips

• Ensure all screws are tightened properly to avoid loosening over time.
• Check alignment periodically to maintain effectiveness.