Securit S5427 Brass Double Ball Catch, 50mm

Description

How to Use the SECURIT S5427 Double Ball Catch Brass 50mm

Introduction

The SECURIT S5427 Double Ball Catch Brass 50mm is designed to secure doors and panels with ease. Follow the instructions below to install and use this product effectively.

Tools Needed

• Drill
• Screwdriver
• Measuring tape
• Pencil

Installation Steps

1. Measure and Mark: Use a measuring tape to determine the desired location on the door and frame where the catch will be installed. Mark the spots with a pencil.
2. Drill Pilot Holes: Carefully drill pilot holes into the marked spots to ensure accurate placement of screws.
3. Align the Catch: Position the double ball catch on the door according to your markings.
4. Secure with Screws: Use a screwdriver to attach the catch to the door by securing it with screws through the pre-drilled holes.
5. Install the Strike Plate: Align the strike plate on the frame to match the position of the ball catch. Mark, drill pilot holes, and secure it with screws.

Usage Tips

• Ensure both the catch and strike plate are aligned properly for smooth operation.
• Regularly check and tighten screws to maintain secure attachment.
• Lubricate the ball catch periodically to ensure easy opening and closing.

Safety Precautions

• Wear safety glasses while drilling.
• Keep hands away from the drill bit and sharp edges.
• Ensure tools are used correctly to prevent injury.