SECURIT S5421 BRASS PLATED ADJUSTABLE ROLLER CATCH

Description

How to Use the SECURIT S5421 Adjustable Roller Catch Brass Plated

Introduction

The SECURIT S5421 Adjustable Roller Catch is designed to secure cabinet doors and similar applications. Follow these simple steps to install and adjust your roller catch.

Tools and Materials Needed

• Drill
• Screwdriver
• Measuring tape
• Pencil
• Screws (typically included with the product)

Installation Steps

1. Position the Roller Catch:
   • Open the cabinet door and decide on the optimal position for the roller catch on the cabinet frame.
   • Mark the position lightly with a pencil.
2. Drill Pilot Holes:
   • Using your drill, create pilot holes at the marked positions to make it easier to install the screws.
3. Attach the Roller Catch:
   • Align the roller catch with the pilot holes and secure it using the screws.
   • Ensure it is tightly fastened to prevent any movement.
4. Position the Strike Plate:
   • Close the cabinet door to identify where the roller catch meets the door.
   • Mark this position on the door with a pencil.
5. Install the Strike Plate:
   • Drill pilot holes on the door at the marked position for the strike plate.
   • Secure the strike plate using screws.

Adjusting the Roller Catch

1. Test the Fit:
   • Close the cabinet door to ensure it latches securely.
   • If the door does not close properly or is too tight, adjustments may be needed.
2. Adjust the Roller Tension:
   • Locate the adjustment screw on the roller catch.
   • Turn clockwise to increase tension or counterclockwise to decrease tension until the desired fit is achieved.
3. Final Check:
   • Open and close the door several times to ensure smooth operation.

Safety Tips

• Always wear protective eyewear when using power tools.
• Ensure the drill is turned off and unplugged when changing drill bits.