SECURIT S5162 150MM BLACK CAST PULL HANDLE

How to Use the SECURIT S5162 Pull Handle Cast Black 150mm

Introduction

This guide provides step-by-step instructions for installing and using the SECURIT S5162 Pull Handle. This handle is designed for doors and can enhance both functionality and aesthetics.

Tools Required

• Drill
• Screwdriver
• Measuring tape
• Pencil
• Level

Installation Steps

1. Measure and Mark: Use the measuring tape to determine the desired height for the handle on the door. Mark the positions with a pencil.
2. Align the Handle: Place the pull handle against the door, aligning it with the pencil marks. Use a level to ensure it is straight.
3. Drill Holes: Carefully drill pilot holes into the door at the marked positions for the screws.
4. Attach the Handle: Line up the handle with the drilled holes and use a screwdriver to secure the handle onto the door with screws.
5. Test the Installation: Pull on the handle gently to ensure it is firmly attached and functions properly.

Usage Tips

• Regularly check the screws to make sure they remain tight.
• Clean the handle with a soft cloth to maintain its finish.
• Consider applying a protective coating to prevent wear over time.

Safety Precautions

• Ensure all tools are used safely and according to their instructions.
• Wear protective eyewear when drilling.
• Keep children and pets away from the installation area.

Conclusion

With these steps, your SECURIT S5162 Pull Handle should be installed and ready for use. Enjoy the enhanced functionality and style it brings to your door.