Securit S4523 Black Light Tee Hinges, 1.5mm, 200mm

Description

How to Use the SECURIT S4523 Tee Hinges Light Black 1.5mm 200mm

Introduction

The SECURIT S4523 Tee Hinges are designed for light-duty applications and are ideal for use in doors, gates, and cabinets. Follow these instructions to ensure proper installation and use.

Tools Required

• Screwdriver
• Drill
• Drill bits
• Measuring tape
• Pencil
• Level

Installation Instructions

Step 1: Prepare the Surface

• Determine the location where you want to install the hinge.
• Ensure the surface is clean and free of debris.

Step 2: Mark the Position

• Use the measuring tape and pencil to mark the position for the hinge on both the door/gate and the frame.
• Ensure the marks are aligned and level.

Step 3: Drill Pilot Holes

• Using the drill and appropriate drill bit, create pilot holes at the marked positions.
• Drill the holes slightly smaller than the screws to ensure a tight fit.

Step 4: Attach the Hinge

• Align the hinge with the pilot holes on the surface.
• Insert screws through the hinge holes and into the pilot holes.
• Tighten the screws using the screwdriver until the hinge is securely attached.

Step 5: Test the Installation

• Open and close the door or gate to ensure smooth movement.
• Check for any loose screws and tighten if necessary.

Maintenance Tips

• Regularly check the hinge for any signs of wear or damage.
• Lubricate the hinge periodically to ensure smooth operation.
• Tighten any loose screws as needed.

Conclusion

By following these instructions, you can properly install and maintain your SECURIT S4523 Tee Hinges, ensuring a long-lasting and reliable performance.