SECURIT S4314 65MM SELF-COLORED STEEL BUTT HINGES – PAIR

Description

How to Use Securit S4314 Steel Butt Hinges

Introduction

The Securit S4314 Steel Butt Hinges are designed for doors and cabinets. They are made from durable steel and are suitable for a variety of applications. Follow the steps below to properly install and use these hinges.

What You Will Need

• Securit S4314 Steel Butt Hinges (Pair)
• Screws (appropriate size for your door or cabinet)
• Screwdriver
• Drill (optional, for pre-drilling holes)
• Pencil
• Measuring tape

Installation Steps

1. Measure and Mark:
   • Determine the placement for your hinges on the door or cabinet.
   • Use a measuring tape and pencil to mark the position where each hinge will be installed.
2. Prepare the Door/Cabinet:
   • If necessary, use a drill to pre-drill holes for the screws. This can make it easier to attach the hinges.
   • Ensure the holes are aligned with the hinge holes.
3. Attach the Hinges:
   • Place one hinge at the marked position on the door or cabinet.
   • Use the screwdriver to attach the hinge with screws.
   • Repeat the process for the second hinge.
4. Mount the Door/Cabinet:
   • Align the door or cabinet to the frame or structure it will be attached to.
   • Secure the other side of the hinges to the frame using screws.
5. Test the Movement:
   • Open and close the door or cabinet to ensure smooth movement.
   • Make any adjustments if necessary to ensure proper alignment and operation.

Tips

• Ensure that the screws are tight, but be careful not to overtighten and strip the screws.
• Consider using a level to ensure that the hinges are aligned correctly.
• If the door or cabinet is heavy, it may be helpful to have an extra person assist with installation.

Conclusion

By following these steps, you can properly install and use the Securit S4314 Steel Butt Hinges. With careful installation, these hinges will provide reliable support and smooth operation for your doors and cabinets.