SECURIT S4302 75MM POLISHED CHROME PLATED STEEL BUTT HINGES

How to Use SECURIT S4302 Steel Butt Hinges

Introduction

The SECURIT S4302 Steel Butt Hinges are polished chrome plated and measure 75mm. They are designed for installing doors, cabinets, or other fixtures that require a swinging motion.

Tools Required

• Screwdriver
• Drill
• Measuring tape
• Pencil
• Chisel (optional for mortising)

Installation Steps

1. Prepare the Door and Frame

• Measure and mark the positions for the hinges on both the door and the door frame.
• Ensure the marks are aligned for a proper fit.
• If needed, use a chisel to create a mortise for the hinge to sit flush with the surface.

2. Attach Hinges to the Door

• Align the hinge with the marked position on the door.
• Use a drill to create pilot holes for the screws.
• Screw the hinge onto the door using a screwdriver.

3. Attach Hinges to the Door Frame

• Position the door with the attached hinges against the door frame.
• Ensure the door is level and aligned correctly within the frame.
• Mark the positions for the hinges on the door frame.
• Drill pilot holes and screw the hinges into the door frame.

4. Test the Door

• Open and close the door to ensure it swings smoothly and is properly aligned.
• Adjust the positioning if necessary by loosening the screws and realigning the hinges.

Maintenance Tips

• Regularly check the screws to ensure they remain tight.
• Lubricate the hinges occasionally to prevent squeaking.

By following these instructions, you can successfully install the SECURIT S4302 Steel Butt Hinges for your project.