SECURIT S3144 Satin Aluminum Cylinder Pull, 75mm

Description

How to Use the Securit S3144 Aluminium Cylinder Pull Satin 75mm

Introduction

The Securit S3144 Aluminium Cylinder Pull is designed to provide a grip for opening doors equipped with a cylinder lock. Follow these instructions to ensure proper installation and use.

Tools Required

• Screwdriver
• Measuring tape
• Drill (optional)

Installation Instructions

1. Identify the location where you want to install the cylinder pull. Typically, it is installed directly above or below the cylinder lock on the door.
2. Use the measuring tape to ensure the pull is centered over the lock, and mark the screw holes’ positions on the door.
3. If necessary, use a drill to create pilot holes where you have marked the screw positions.
4. Align the cylinder pull with the marked positions on the door.
5. Secure the cylinder pull to the door using the provided screws and a screwdriver, ensuring it is tightly fastened.

Usage Instructions

• Grip the cylinder pull firmly to open or close the door.
• Ensure the door is fully closed to secure the lock properly when not in use.

Maintenance Tips

• Regularly check the screws to ensure they remain tight and secure.
• Clean the cylinder pull with a soft cloth to maintain its satin finish.

Safety Precautions

• Ensure the installation area is free of any wiring or plumbing before drilling.
• Always use appropriate personal protective equipment when using tools.