Securit S1932 Mortice Latch 75mm, Nickel Plated

Description

How to Use the SECURIT S1932 Nickle Plated Mortice Latch 75mm

Introduction

The SECURIT S1932 Nickel Plated Mortice Latch is designed for doors requiring a latch mechanism without a locking function. Follow these instructions for installation and use.

Tools Required

• Screwdriver
• Drill
• Chisel
• Tape Measure
• Pencil
• Safety glasses

Installation Steps

1. Prepare the Door

• Measure 75mm from the edge of the door to determine the placement of the latch.
• Mark the position with a pencil.

2. Drill the Latch Hole

• Use a drill to create a hole at the marked position on the edge of the door.
• The hole should be deep enough to accommodate the latch mechanism.

3. Chisel the Recess

• Use a chisel to create a recess around the hole to fit the latch faceplate flush with the door edge.

4. Install the Latch

• Insert the latch into the drilled hole.
• Screw the faceplate into the door using a screwdriver.

5. Install the Strike Plate

• Close the door to mark the position of the latch on the door frame.
• Chisel a recess on the door frame for the strike plate.
• Screw the strike plate into place.

Testing the Latch

• Open and close the door to ensure the latch operates smoothly.
• Adjust the strike plate if necessary to ensure proper alignment.

Maintenance Tips

• Regularly check for loose screws and tighten them as needed.
• Lubricate the latch mechanism occasionally for smooth operation.

Safety Precautions

• Always wear safety glasses when using power tools.
• Ensure the door is securely held in place during installation to prevent injuries.