SECURIT S1581 BLACK 75MM TOWER BOLT

How to Use the SECURIT S1581 Tower Bolt Black 75mm

Introduction

The SECURIT S1581 Tower Bolt is a hardware accessory used to secure doors and gates. This guide provides step-by-step instructions on how to properly install and use the tower bolt for beginners.

Tools Required

• Screwdriver
• Drill (if needed)
• Measuring tape
• Pencil or marker
• Screws (usually included with the product)

Installation Steps

1. Choose Location: Determine where you want to install the tower bolt on your door or gate. Common locations are the top or bottom edge of the door.
2. Mark Screw Holes: Hold the tower bolt against the door at the chosen location. Use a pencil or marker to mark the positions of the screw holes.
3. Drill Pilot Holes: If necessary, drill pilot holes where you marked the screw positions to make it easier to insert the screws.
4. Attach the Bolt: Align the tower bolt with the pilot holes and use a screwdriver to fasten the screws, securing the bolt in place.
5. Install Keeper Plate: Align the keeper plate with the bolt and mark its position on the frame or second door. Drill pilot holes if necessary and secure the keeper plate with screws.

Using the Tower Bolt

• Locking: Slide the bolt into the keeper plate to lock the door in place.
• Unlocking: Slide the bolt out of the keeper plate to unlock the door.

Maintenance Tips

• Regularly check that the screws are tight and secure.
• Apply lubricant to the bolt if it becomes stiff or difficult to slide.
• Ensure the bolt and keeper plate are aligned properly for smooth operation.

Safety Precautions

• Ensure the installation is sturdy to prevent accidental opening.
• Do not force the bolt if it does not slide easily; check for alignment issues first.