SECURIT S1556 150MM WIDE ALUMINUM DOOR BOLT

Description

How to Use the SECURIT S1556 ALU DOOR BOLT 1 WIDE 150MM

Introduction

This guide will help you install and use the SECURIT S1556 ALU Door Bolt, a durable and reliable door locking mechanism.

Tools Required

• Screwdriver
• Drill (optional, for new installations)
• Measuring tape
• Pencil or marker

Installation Steps

1. Choose the Location:
   • Decide where on the door you want to install the bolt. It can be placed at the top, bottom, or side of the door for additional security.
2. Mark the Position:
   • Use a measuring tape to ensure the bolt is level and mark the position with a pencil or marker.
3. Drill Pilot Holes (if necessary):
   • If the door does not have pre-drilled holes, use a drill to create small pilot holes where the screws will go.
4. Attach the Bolt:
   • Align the bolt with the marked position and screw it into place using the screwdriver.
5. Install the Strike Plate:
   • Close the door and mark where the bolt touches the frame. Drill pilot holes for the strike plate if necessary and screw it in place.

Using the Door Bolt

1. Locking the Door:
   • Slide the bolt into the strike plate to lock the door.
2. Unlocking the Door:
   • Slide the bolt back to its original position to unlock the door.

Maintenance Tips

• Regularly check the screws to ensure they are tight and secure.
• Lubricate the bolt occasionally to ensure smooth operation.
• Inspect the strike plate for any signs of wear and replace if necessary.

By following these steps, you can effectively use the SECURIT S1556 ALU Door Bolt to enhance the security of your door.