SECURIT S1527 BRASS NECK BOLT, 1 INCH WIDE, 75MM LENGTH

How to Use the Securit S1527 Brass Necked Bolt

Introduction

The Securit S1527 Brass Necked Bolt is designed for securing doors or gates. Follow these instructions to ensure proper installation and use.

Tools and Materials Needed

• Securit S1527 Brass Necked Bolt
• Screwdriver
• Drill (if necessary)
• Screws (usually provided with the bolt)
• Measuring tape
• Pencil or marker

Step-by-Step Instructions

1. Choose the Installation Location

• Select a suitable location on the door or gate where the bolt will be installed.
• Ensure the location allows the bolt to fully extend into the door frame or ground.

2. Mark the Position

• Use a measuring tape to position the bolt accurately on the door.
• Mark the screw holes with a pencil or marker.

3. Drill Pilot Holes (if necessary)

• If required, drill pilot holes at the marked positions to make screwing easier and to prevent wood splitting.

4. Install the Bolt

• Align the bolt with the marked positions.
• Secure the bolt using screws and a screwdriver.
• Ensure the bolt slides smoothly into the receiving hole or strike plate.

5. Test the Bolt

• Slide the bolt in and out to ensure it moves freely and locks securely.
• Make any necessary adjustments if the bolt does not operate smoothly.

Safety Tips

• Keep tools out of reach of children.
• Do not use excessive force when installing screws to avoid damaging the door or bolt.

Troubleshooting

• If the bolt does not align, adjust the position of the strike plate or the bolt.
• If the bolt is difficult to slide, check for obstructions or misalignment.

Conclusion

With these instructions, you should be able to install and use the Securit S1527 Brass Necked Bolt effectively. Ensure regular maintenance for long-term use.