SECURIT S1464 75MM BRASS HASP AND STAPLE

Description

How to Use the SECURIT S1464 Brass Hasp & Staple 75MM

Introduction

The SECURIT S1464 Brass Hasp & Staple is a security device used to secure doors, cabinets, or gates. Follow these instructions to ensure proper installation and usage.

Tools Required

• Drill
• Screwdriver
• Pencil or Marker
• Measuring Tape

Installation Steps

Step 1: Choose the Installation Location

• Select a suitable location where the hasp and staple will be installed. Ensure that the surface is clean and even.
• Use a measuring tape to decide where both parts will align when closed.

Step 2: Mark the Screw Holes

• Hold the hasp in the desired position on the surface where it will be mounted.
• Use a pencil or marker to mark the screw holes on the surface.
• Repeat the process for the staple on the adjacent surface or door frame.

Step 3: Drill Pilot Holes

• Using a drill, make pilot holes on the marked spots. This helps in guiding the screws and prevents the material from splitting.

Step 4: Secure the Hasp

• Align the hasp with the pilot holes.
• Use a screwdriver to fasten the screws through the hasp into the surface securely.

Step 5: Secure the Staple

• Align the staple with its corresponding pilot holes on the adjacent surface.
• Screw the staple into place, ensuring it aligns perfectly with the hasp when closed.

Usage Instructions

• To secure, close the hasp over the staple.
• Insert a suitable lock through the staple loop for enhanced security.

Safety Precautions

• Ensure all screws are tightly fastened to prevent any movement or tampering.
• Regularly check the condition of the hasp and staple to ensure they remain securely in place and free from damage.

Conclusion

By following these steps, you can effectively install and use the SECURIT S1464 Brass Hasp & Staple for securing various items. Always ensure it is properly aligned and fastened for maximum security.