SECURIT S1462 50MM BRASS HASP AND STAPLE

Description

How to Use the SECURIT S1462 Brass Hasp & Staple 50mm

Introduction

The SECURIT S1462 Brass Hasp & Staple is a locking mechanism designed to secure doors, gates, cabinets, and other items. This guide will help you understand how to properly install and use this product.

Tools Needed

• Drill
• Screwdriver
• Pencil
• Measuring tape
• Level

Installation Instructions

1. Choose Location: Determine where you want to install the hasp and staple. It should be in a position that allows the staple to align with the hasp when closed.
2. Mark Drill Points: Use a pencil to mark the screw holes on the surface where you will attach the hasp.
3. Drill Holes: Drill holes at the marked points. Ensure the holes are slightly smaller than the screws to ensure a tight fit.
4. Attach Hasp: Align the hasp with the drilled holes and secure it using screws and a screwdriver.
5. Align Staple: Close the hasp and mark the position for the staple on the corresponding surface.
6. Mark and Drill Staple Holes: Mark the staple holes, drill them, and attach the staple using screws.

Using the Hasp & Staple

1. Close the Door/Gate: Ensure the door or gate you are securing is properly closed.
2. Align the Hasp: Swing the hasp over the staple to cover it completely.
3. Secure with Padlock: Insert a padlock through the staple loop and lock it to secure the hasp in place.

Maintenance Tips

• Regularly check the screws to ensure they are tight and secure.
• Lubricate the hinge of the hasp periodically to ensure smooth operation.
• Inspect for any signs of rust or wear, especially if used outdoors, and replace if necessary.