SECURIT S1415 ZINC-PLATED 100MM LIGHT PAD BOLT

Description

How to Use the SECURIT S1415 Light Pad Bolt Zinc Plated 100mm

Introduction

The SECURIT S1415 Light Pad Bolt is a durable and secure zinc-plated bolt designed for use on doors and gates. Follow these simple instructions to ensure proper installation and use.

Tools Required

• Drill
• Screwdriver
• Pencil or marker
• Measuring tape

Installation Steps

1. Choose Location: Decide where you want to install the pad bolt on your door or gate. Typically, it is installed on the inside for security purposes.
2. Mark the Position: Use a pencil or marker to mark where the bolt will be placed. Ensure it is aligned properly with the strike plate or the frame.
3. Drill Pilot Holes: Using a drill, create pilot holes at the marked spots for the screws. This will make it easier to insert the screws and prevent splitting the wood.
4. Attach the Bolt: Position the pad bolt over the drilled holes and use a screwdriver to fasten it securely with the screws provided.
5. Install the Strike Plate: Align the strike plate on the door frame or gate post where the bolt will slide into. Mark its position, drill pilot holes, and attach it with screws.

Usage Instructions

• Slide to Lock: To lock, simply slide the bolt into the strike plate until it fits snugly.
• Slide to Unlock: To unlock, slide the bolt back to its original position.

Maintenance Tips

• Regularly check the screws to ensure they are tight and secure.
• Apply lubricant to the bolt mechanism if it starts to stick or feel stiff.
• Inspect for rust or corrosion, especially if used outdoors, and clean as necessary.

Safety Precautions

• Ensure the bolt is installed at a height that is easily accessible.
• Do not force the bolt if it sticks; check alignment and apply lubricant if necessary.

By following these instructions, you can ensure that your SECURIT S1415 Light Pad Bolt is installed and used properly for enhanced security.