RONSEAL 30GM High-Performance Wood Filler Catalyst

Description

How to Use Ronseal High Performance Wood Filler Catalyst 30gm

Materials Needed

• Ronseal High Performance Wood Filler Catalyst 30gm
• Mixing board or surface
• Spatula or putty knife
• Sandpaper
• Protective gloves

Preparation

1. Ensure the surface you are working on is clean, dry, and free from dust and debris.
2. Put on protective gloves to avoid skin contact with the filler.

Mixing

1. Open the Ronseal High Performance Wood Filler Catalyst package.
2. Place a small amount of the wood filler on a mixing board or surface.
3. Add a small amount of the catalyst to the filler. Refer to the product instructions for the correct ratio.
4. Use a spatula or putty knife to mix the filler and catalyst thoroughly until you achieve a consistent color.

Application

1. Using the spatula or putty knife, apply the mixed filler to the wood surface that needs repair.
2. Press the filler firmly into any cracks or holes, ensuring there are no air pockets.
3. Smooth the surface of the filler to make it level with the surrounding wood.

Drying and Finishing

1. Allow the filler to dry completely as per the product instructions. Drying time may vary based on the thickness of the application.
2. Once dry, sand the repaired area until it is smooth and flush with the surrounding surface.
3. Clean off any dust from sanding with a dry cloth.

Cleanup

• Clean tools and surfaces immediately after use to prevent the filler from hardening on them.
• Dispose of any leftover filler and catalyst responsibly.

Safety Tips

• Always work in a well-ventilated area.
• Avoid contact with skin and eyes. If contact occurs, wash thoroughly with water.
• Keep out of reach of children.