Rolson 115mm Segmented Dry Cut Blade with Diamond Tips

Description

How to Use the ROLSON Diamond Tipped Blade Dry Cut Segmented 115mm

Safety First

• Ensure you are wearing appropriate safety gear including goggles, gloves, and a dust mask.
• Verify that the tool you are using is unplugged before attaching the blade.
• Ensure you are in a well-ventilated area.

Attaching the Blade

1. Remove any existing blade from the tool, if present.
2. Inspect the ROLSON diamond tipped blade for any damage or defects.
3. Align the blade with the tool’s arbor hole.
4. Secure the blade firmly according to the tool manufacturer’s instructions.
5. Ensure the blade is tightly fastened and aligned correctly.

Preparing to Cut

• Mark the material where you intend to make the cut.
• Secure the material in place using clamps or a vice.
• Double-check to ensure the blade is securely attached.

Making the Cut

1. Plug in the tool and power it on.
2. Hold the tool firmly with both hands.
3. Align the blade with the marked line on the material.
4. Begin cutting with a steady and controlled motion.
5. Allow the blade to do the work; do not force it through the material.

After Use

• Turn off the tool and unplug it.
• Allow the blade to cool down before handling.
• Inspect the blade for any damage and clean any debris from it.
• Store the blade in a safe, dry place.

Important Notes

• This blade is designed for dry cutting. Do not use with water or other lubricants.
• Ensure the blade is compatible with your tool before use.