ROADSTER H1 12V 55W Single Pin Car Headlight Bulb/Lamp

Description

How to Use the ROADSTER H1 12V 55W 1 PIN Car Headlight Bulb/Lamp

Safety Precautions

• Ensure the vehicle is turned off and the keys are removed from the ignition.
• Allow the existing bulb to cool down before handling to avoid burns.
• Avoid touching the glass part of the new bulb with your fingers to prevent damage. Use gloves or a clean cloth if necessary.

Tools Required

• Owner’s manual (for specific instructions related to your vehicle model)
• Screwdriver (if needed for headlight housing)
• Gloves or a clean cloth

Installation Steps

1. Open the hood of your vehicle and locate the headlight assembly.
2. Refer to your owner’s manual if you are unsure about the location of the headlight bulb.
3. If required, use a screwdriver to remove any covers or retainers holding the headlight assembly in place.
4. Disconnect the power connector from the back of the existing headlight bulb.
5. Remove the old bulb by twisting it counterclockwise or by releasing the retaining clip, depending on your vehicle’s design.
6. Carefully insert the new ROADSTER H1 12V 55W 1 PIN bulb into the socket. Ensure it is seated properly.
7. Reconnect the power connector to the new bulb.
8. Replace any covers or retainers that were removed earlier, securing the headlight assembly back in place.
9. Close the hood of the vehicle.

Testing the New Bulb

• Turn on the vehicle’s headlights to ensure the new bulb is functioning correctly.
• If the bulb does not light up, double-check the connection and installation steps.

Additional Tips

• Always replace headlight bulbs in pairs to maintain even lighting.
• Regularly check your headlights for alignment and functionality.