PLUMBER PRO SANITARY SPRAY / BIDET SPRAYER SET

How to Use the Plumber Pro Sani Spray / Bidet Sprayer Kit

Installation

1. Turn off the water supply to your toilet.
2. Unscrew the existing flexible hose that connects the toilet tank to the water supply valve.
3. Attach the T-valve adapter to the water supply line.
4. Reconnect the flexible hose to the top of the T-valve.
5. Connect the sprayer hose to the side outlet of the T-valve.
6. Mount the sprayer holder on the wall or the side of the toilet tank.
7. Attach the sprayer to the hose and place it in the holder.
8. Turn on the water supply and check for leaks.

Using the Sprayer

1. Pick up the bidet sprayer from its holder.
2. Use the handle to aim the sprayer at the area you wish to clean.
3. Gently squeeze the trigger to control the water pressure.
4. Adjust the pressure as needed for comfort and efficiency.
5. Release the trigger to stop the water flow.
6. Return the sprayer to its holder when finished.

Safety and Maintenance

• Always turn off the T-valve after use to prevent leaks.
• Regularly check all connections for any signs of wear or leakage.
• Clean the sprayer nozzle periodically to ensure proper water flow.
• Ensure that the sprayer is completely drained after use to avoid water damage.

Troubleshooting

• If the sprayer leaks, check all connections and tighten if necessary.
• If there is low water pressure, ensure the T-valve is fully open.
• If the sprayer is clogged, clean the nozzle with a needle or pin.